1.5″ Snap Lock
The Snap Lock panel has been an industry standard for many years and for good reason. This panel provides a lifetime of protection against all of Mother natures elements. This true standing seam panel is manufactured in a 1.5” seam height. It is manufactured in widths of 16.125” & 20.125”.
Note: The load tables have been compiled for the design of steel roofing and siding used in conjunction with either wood or steel-framed structures. EPIC Steel assumes no responsibility, either expressed or implied, for its use.
Attributes:
True Hidden Fastener Clip System, On-Site Rollforming, Architectural Appearance, High Wind Loads, and Many Material Options.
Gauge
Gauge
24, 26
Weight
Weight
24 Ga. – 1.00lb./SQFT
26 Ga. – .75lb./SQFT
Steel Yield Stress
Steel Yield Stress
50,000 Grade-D Galvalume Steel Gauge, AZ-50
Paint System
Paint System
ULTRA-CLADTM Kynar 500®/ Hylar 5000®
Warranty
Warranty
35-Years on ULTRA‑CLADTM
Available Material Types
Available Material Types
Painted, Galvalume, Bonderized, Rezibond, 2-Tone, Vintage, 16 & 20 oz. Copper
Gauging System
Gauging System
Epic Steel follows the national A.I.S.I. (American Iron and Steel Institute) specifications manual for tolerances in galvanized sheet metal.
All gauges conform to ASTM: A525, A792, A606, A653, and A924 Grade D (50,000 min. yield) unless otherwise designated at time of order.
Application Details:
Minimum Slope Requirement
Roof Application
Minimum Slope Requirement
|2/12
Roof Application
|Fastener Spacing: 12” and 24”, refer to engineering specifications for proper clip spacing and substrate specifications.
Standing seam metal roofing can be used in conjunction with exposed fastener trim pieces or trim that is designed to reduce/eliminate the need for exposed fasteners on the roofing surface. This designation must be made prior to production.
EPIC Steel is neither partially nor solely responsible for improper installation or defects as a result of installation. Epic Steel recommends obtaining a color chip prior to placing an order. Please contact your Epic Steel representative to learn more.
