2′ Delta Rib (Special Order Panel)

2′ Delta Rib

(Special Order Panel)

The 2′ Delta Rib metal roofing and siding panel is unique to the metal roofing industry. Originally designed to withstand the weather and stresses associated with agricultural applications, this panel has become popular as a modern alternative due to the more subtle profile than the Tuf Rib and PBR panel.

Minimum Slope Requirements:

3:12

Screw Application:

#10 Wood grip fasteners are designed for use with dimensional lumber.

#14 Wafer fasteners are designed for use with plywood sheeting, OSB and wafer wood (7/16” minimum thickness).

#12 Tek screws are designed to be used with structural steel up to 3/16” in thickness.

Roof Application:

Fasteners are to be applied along the side of every rib and attached to each purlin, 2’ on center. Please note that it is the responsibility of the builder to ensure that purlins are adequately spaced to meet specific engineering requirements.

Downloadable Resources:

Standard Trim

Screw Patterns

Available Gauges

28

Paint Warranty

40 Years

Paint System

Ceranamel Xt‑40S, Silicone Modified Polyester

Minimum Length

36″

Maximum Length

25′

Weight

1.5 lb/LF

Available Materials

Painted, Galvalume®

Gauging System

Epic Steel follows the national A.I.S.I. (American Iron and Steel Institute) specifications manual for tolerances in galvanized sheet metal.

All gauges conform to ASTM A792 and A653 Grade D (50,000 min. yield) unless otherwise specified at the time of the order.

Attributes

Lightweight
Economical
Sleek Design

Panel Color Options

* Certain colors may be subject to an order minimum and longer lead time. Epic Steel recommends obtaining a color chip prior to placing an order. Warranties are based on paint system and paint systems vary between gauges. Please contact your Epic Steel representative to learn more.