Nail Strip

Standing-Seam

1″ Nail Strip

Nail Strip Standing Seam provides easy installation, very high wind loads, and waterproofing, in a wide array of colors and material types, delivering a unique option for homeowners and contractors.

This hidden fastener panel is manufactured in a 1” seam height and is available in widths of 12.125″, 16.125″, and 20.125″. The width is dependent upon the height of the seam that is spec’d for the job. (Panel widths may vary due to coil size and material thickness).

Minimum Slope Requirements:

3:12

Screw Application:

Fastener Spacing: 12″ to 24″, refer to engineering specifications for proper spacing and substrate specifications.

Roof Applications:

Standing seam metal roofing can be used in conjunction with exposed fastener trim pieces or trim that is designed to reduce/eliminate the need for exposed fasteners on the roofing surface. This designation must be made prior to production.

EPIC Steel is neither partially nor solely responsible for improper installation or defects as a result of installation.

Downloadable Resources:

Installation Guide

Standard Trim

 

Screw Patterns

 

Available Gauges

24, 26

Paint Warranty

Up to 35 Years

Paint System

Durapon70™ PVDF

Kynar500® /Hylar5000®

PPG™ SMP

Minimum Length

9″

Maximum Length

No Maximum Length

Weight

24 Ga. – 1.00lb./SQFT
26 Ga. – .75lb./SQFT

Available Materials

Painted, Galvalume, Bonderized, 2-Tone, Vintage, 16 & 20 oz. Copper

Gauging System

Epic Steel follows the national A.I.S.I. (American Iron and Steel Institute) specifications manual for tolerances in galvanized sheet metal.

All gauges conform to ASTM: A792, A653, A924 Grade D (50,000 min. yield) unless otherwise designated at the time of order.

Attributes

  • Hidden Fastener
  • Easy Installation
  • Clip System Built Into Panel
  • On Site Rollforming
  • Architectural Appearance
  • High Wind Loads
  • Many Material Options

Testing

  • UL 580 Wind Uplift (Class 90)
  • UL 2218 Class 4 Hail Impact
  • UL 790 Class A Fire Rating

Standing-Seam

1.5″ Nail Strip

Nail Strip Standing Seam provides easy installation, very high wind loads, and waterproofing, in a wide array of colors and material types, delivering a unique option for homeowners and contractors.

This hidden fastener panel is manufactured in a 1.5” seam height and is most readily available in widths of 15.125” & 19.125″.  Panel width is dependent upon the height of the seam that is spec’d for the job. (Panel widths may vary due to coil size and material thickness).

Minimum Slope Requirements:

3:12

Screw Application:

Fastener Spacing: 12″ to 24″, refer to engineering specifications for proper clip spacing and substrate specifications.

Roof Applications:

Standing seam metal roofing can be used in conjunction with exposed fastener trim pieces or trim that is designed to reduce / eliminate the need of exposed fasteners on the roofing surface. This designation must be made prior to production.

EPIC Steel is neither partially nor solely responsible for improper installation or defects as a result of installation.

Downloadable Resources:

Installation Guide

Standard Trim

 

Screw Patterns

 

Available Gauges

24, 26

Paint Warranty

Up to 35 Years

Paint System

Durapon70™ PVDF

Kynar500® /Hylar5000®

PPG™ SMP

Minimum Length

9″

Maximum Length

No Maximum Length

Weight

24 Ga. – 1.00lb./SQFT
26 Ga. – .75lb./SQFT

Available Materials

Painted, Galvalume, Bonderized, 2-Tone, Vintage, 16 & 20 oz. Copper

Coverage

15.125”, 19.125″

Gauging System

Epic Steel follows the national A.I.S.I. (American Iron and Steel Institute) specifications manual for tolerances in galvanized sheet metal.

All gauges conform to ASTM: A792, A653, A924 Grade D (50,000 min. yield) unless otherwise designated at time of order.

Attributes

  • Hidden Fastener
  • Easy Installation
  • Clip System Built Into Panel
  • On Site Rollforming
  • Architectural Appearance
  • High Wind Loads
  • Many Material Options

Testing

  • UL 580 Wind Uplift (Class 90)
  • UL 2218 Class 4 Hail Impact
  • UL 790 Class A Fire Rating

Panel Color Options

* Certain colors may be subject to an order minimum and longer lead time.  Epic Steel recommends obtaining a color chip prior to placing an order. Warranties are based on paint system and paint systems vary between gauges.  Please contact your Epic Steel representative to learn more.

26 Gauge – STOCK – Color Options

26 Gauge – Special Order – Color Options

24 Gauge – STOCK – Color Options

24 Gauge – Special Order – Color Options

Contact Us Today